TÉLÉCHARGER CONTACTSAY 0.1

TÉLÉCHARGER CONTACTSAY 0.1

TÉLÉCHARGER CONTACTSAY 0.1

Always keep this owner s manual in the vehicle. Bewahren Sie diese Anleitung immer im Fahrzeug auf. Lees deze handleiding grondig voordat u de Bluetooth SWC gebruikt.

Nom: contactsay 0.1
Format:Fichier D’archive
Version:Nouvelle
Licence:Libre!
Système d’exploitation: MacOS. iOS. Windows XP/7/10. Android.
Taille:12.37 MB

When connected, all of these calls are hands-free. You can terminate a speech recognition session at any time by pressing the arrow down button. Placing a call with speech recognition You can enter a phone number as 1 or more segments of digits. A segment can include up to 15 digits. An entire number can include no more than 32 digits. Note: Speak numbers as continuous digits.

For example, dictate as , not twenty-two-eleven. Placing a call with all digits Action 1 Press and hold the mode button. The system responds: Number please? The system recites the digits heard. The system responds: Dialing. For example, say the first 3 numbers. Repeat this step until you entered the complete phone number. To delete a phone number segment, say Clear when prompted for the next segment.

The system responds Last string cleared [Last entry cleared], repeats any remaining segments, and waits for you to dictate a new segment.

To clear all phone number segments dictated so far, say Clear all when prompted for the next segment. The system clears all segments and returns to the Number please? Using your Bluetooth hands-free system 15 17 Dialing a number from the contact list Action 1 Press and hold the mode button. Note: The contact must be a valid contact stored in the contact list.

The system responds: Calling.

Dialing a number using the phone s voice tags [Phone voice name] Action 1 Press and hold the mode button. Note: The voice tag must already be stored in the phone. The system responds: Phone voice tag please, [Phone voice name, please].

TOP 7 ANDROID

The system calls the number associated with the phone voice tag [phone voice name]. Using the speed dial command Not available for all phones Action 1 Press and hold the mode button. The system responds: Speed dial number, please. The system repeats the number it heard and asks: Is this correct? The system responds: Dialing, and places the call. Note: Speak speed dial numbers as continuous digits. For example, dictate speed dial location 22 as , not twenty-two. The system responds: Redialing.

If caller ID is not available: The system plays the in-band ring tone, if the phone supports it. If no in-band ring tone is supported, the system generates a local ring tone. To answer an incoming call: Action Press the arrow up button. Ending a call Using the user interface module Action Press the arrow down button. Using the end call command Action 1 Press and hold the mode button.

The system responds: Call ended. A call must be initiating or in progress. Rejecting a call To reject a call while the phone is ringing: Action Press the arrow down button on the user interface module. The system responds: Call rejected. Transferring a call From the Bluetooth hands-free system to your phone Action Press and hold the arrow up button. If your phone asks to switch to handset mode, press yes.

When prompted, say Privacy mode. From your phone to the Bluetooth hands-free system Action Press and hold the arrow up button. When prompted, say Hands-free mode. Using the mute and unmute commands Action To mute the microphone during a call, press and hold the mode button. When prompted, say Mute. To unmute the microphone, press and hold the mode button. When prompted, say Unmute.

Call waiting When you are on a call, an audible beep signals a 2nd call. Action Press and release the arrow up button to place the 1st call on hold and answer the incoming call. Each time you press and release the arrow up button, you toggle between active calls. Note: If the arrow up button is not pressed, the incoming call is automatically rejected and sent to voic if set up on the phone.

You can send DTMF tones from the phone keypad, or by using the enter command: Action 1 Press and hold the mode button. The list can include up to 20 entries. Adding an entry Action 1 Press and hold the mode button. Do you wish to add a contact? Please say a command, say Add contact. If an error is detected, the system asks you to try again. The system repeats the number it heard. The system responds: Contact added. Would you like to add another contact? Using your Bluetooth hands-free system 21 23 Deleting an entry Action 1 Press and hold the mode button.

The system exits to ready state. The system responds: Contact deleted. Listing entries Action 1 Press and hold the mode button. Please say a command, say List contacts. The system begins to list the stored entries. Tip: Note: To move quickly through the list, say Previous contact or Next contact. It is recommended that contact list recordings are recorded in a stationary vehicle. Please say a command : Action 1 Press and hold the mode button.

The system responds: Prompts on or Prompts off. Announcing a caller To turn the caller announce function on or off: Action 1 Press and hold the mode button. The system responds: Caller announce on or Caller announce off. Audio indicators When the system is not in a call or an active speech recognition session, you may hear the following audio indicators: Audio indicator You have a voic [You have a voic message].

You have a new message. Phone battery low. Description New voic message received. New sms message received.

Low battery. Note: These indicators are turned off when you turn off prompts. Using your Bluetooth hands-free system 23 25 Selecting a language Caution: When you change your system s language, all contacts in your contact list are deleted. Action 1 Press and hold the mode and arrow down button, turn on the vehicle ignition, and continue holding the mode and arrow down button for at least 10 seconds. The system enters language selection and responds: Language menu.

Press volume up or down to change language. As you scroll to a language, the system plays the prompt for that language. For example: English. To choose this language, restart the vehicle. The next time you turn on the vehicle ignition, the new language is loaded. Please say command. Main menu.

Dial number Number please. Speed dial Speed dial number please. Redial Calling features quick reference 25 27 Call contact Phone voice tags [Phone voice name] ] Press and hold mode button Press and hold mode button Main menu. Phone voice tag [Phone voice name] Phone voice tag [Phone voice name] please.

Noisy-le-Grand (93)

Setup menu Setup menu. On or off? Contact list Contact list. Contact list is empty. The ability to find word boundaries without requiring pauses between words.

The wireless phone. The process used by two wireless devices, with passcodes as an input, to create the link of the Bluetooth authentication process. Removing all phones Action 1 Press and hold the mode button. The system responds: Are you sure you want to remove all the phones? The system responds: All phones removed [All phones have been removed].

Using your Bluetooth hands-free system 13 15 Placing a call with the Bluetooth hands-free system To place a call, you must first establish a Bluetooth link between the car and your phone see page You can place a call with the system in these ways: Dial a number from the phone not recommended. Digit dial with speech recognition. Use the system s contact list. Speak a phone voice tag [phone voice name]. Use the speed dial command. Use the redial command. When connected, all of these calls are hands-free.

You can terminate a speech recognition session at any time by pressing the arrow down button. Placing a call with speech recognition You can enter a phone number as 1 or more segments of digits. A segment can include up to 15 digits. An entire number can include no more than 32 digits. Note: Speak numbers as continuous digits. For example, dictate as , not twenty-two-eleven. Placing a call with all digits Action 1 Press and hold the mode button.

TextNow Android

The system responds: Number please? The system recites the digits heard. The system responds: Dialing. For example, say the first 3 numbers. Repeat this step until you entered the complete phone number. To delete a phone number segment, say Clear when prompted for the next segment. The system responds Last string cleared [Last entry cleared], repeats any remaining segments, and waits for you to dictate a new segment. To clear all phone number segments dictated so far, say Clear all when prompted for the next segment.

The system clears all segments and returns to the Number please?

Telecharger.com > Windows

Using your Bluetooth hands-free system 15 17 Dialing a number from the contact list Action 1 Press and hold the mode button. Note: The contact must be a valid contact stored in the contact list.

The system responds: Calling. Dialing a number using the phone s voice tags [Phone voice name] Action 1 Press and hold the mode button. Note: The voice tag must already be stored in the phone. The system responds: Phone voice tag please, [Phone voice name, please]. The system calls the number associated with the phone voice tag [phone voice name].

Using the speed dial command Not available for all phones Action 1 Press and hold the mode button. The system responds: Speed dial number, please. The system repeats the number it heard and asks: Is this correct? The system responds: Dialing, and places the call. Note: Speak speed dial numbers as continuous digits. For example, dictate speed dial location 22 as , not twenty-two. The system responds: Redialing. If caller ID is not available: The system plays the in-band ring tone, if the phone supports it.

If no in-band ring tone is supported, the system generates a local ring tone. To answer an incoming call: Action Press the arrow up button.

Ending a call Using the user interface module Action Press the arrow down button. Using the end call command Action 1 Press and hold the mode button.

The system responds: Call ended. A call must be initiating or in progress. Rejecting a call To reject a call while the phone is ringing: Action Press the arrow down button on the user interface module. The system responds: Call rejected.

Transferring a call From the Bluetooth hands-free system to your phone Action Press and hold the arrow up button. If your phone asks to switch to handset mode, press yes. When prompted, say Privacy mode. From your phone to the Bluetooth hands-free system Action Press and hold the arrow up button. When prompted, say Hands-free mode. Using the mute and unmute commands Action To mute the microphone during a call, press and hold the mode button.

When prompted, say Mute. To unmute the microphone, press and hold the mode button. When prompted, say Unmute. Call waiting When you are on a call, an audible beep signals a 2nd call. Action Press and release the arrow up button to place the 1st call on hold and answer the incoming call.

Each time you press and release the arrow up button, you toggle between active calls. Note: If the arrow up button is not pressed, the incoming call is automatically rejected and sent to voic if set up on the phone. You can send DTMF tones from the phone keypad, or by using the enter command: Action 1 Press and hold the mode button. The list can include up to 20 entries. Adding an entry Action 1 Press and hold the mode button.

Do you wish to add a contact? Please say a command, say Add contact. If an error is detected, the system asks you to try again. The system repeats the number it heard.

The system responds: Contact added. Would you like to add another contact? Using your Bluetooth hands-free system 21 23 Deleting an entry Action 1 Press and hold the mode button. The system exits to ready state.

The system responds: Contact deleted. Listing entries Action 1 Press and hold the mode button. Please say a command, say List contacts.

Noisy-le-Grand (93)

The system begins to list the stored entries. Tip: Note: To move quickly through the list, say Previous contact or Next contact. It is recommended that contact list recordings are recorded in a stationary vehicle. Please say a command : Action 1 Press and hold the mode button. The system responds: Prompts on or Prompts off. Announcing a caller To turn the caller announce function on or off: Action 1 Press and hold the mode button.

The system responds: Caller announce on or Caller announce off. Audio indicators When the system is not in a call or an active speech recognition session, you may hear the following audio indicators: Audio indicator You have a voic [You have a voic message]. You have a new message. Phone battery low. Description New voic message received. New sms message received. Low battery. Note: These indicators are turned off when you turn off prompts.

Using your Bluetooth hands-free system 23 25 Selecting a language Caution: When you change your system s language, all contacts in your contact list are deleted.

Action 1 Press and hold the mode and arrow down button, turn on the vehicle ignition, and continue holding the mode and arrow down button for at least 10 seconds. The system enters language selection and responds: Language menu.

Press volume up or down to change language. As you scroll to a language, the system plays the prompt for that language. For example: English. To choose this language, restart the vehicle.

The next time you turn on the vehicle ignition, the new language is loaded. Please say command. Main menu. Dial number Number please.